利用背景噪声成像研究合肥-金华剖面地壳速度结构及径向各向异性的东西差异   总被引：3，自引：1，他引：2       下载免费PDF全文

吴珊珊  姜明明  何玉梅  赵亮  艾印双 《地球物理学报》2018,61(2):584-592

背景噪声成像能够为地壳内部结构提供地震波速的观测证据，能够增进对地壳结构与物性的认识.本文利用背景噪声成像方法对合肥-金华流动地震台阵55个台站数据进行了分析反演，获得了华北克拉通与华南块体东部构造边界附近区域的地壳S波速度与径向各向异性结构.成像结果表明，以东经118°-118.5°附近为界，西北部表现为地壳低速异常和中下地壳正的径向各向异性，东南部表现为地壳高速异常，下部地壳存在负的径向各向异性.由此，本文推测地震波速结构差异反映了地壳内部物质与温度的差异，这种差异与两个地区自中生代晚期以来经历了截然不同的岩浆活动相关.  相似文献   

Time-averaged sub-layer concentration profiles in oscillatory sheet flows     

Yuhai Wang  Wenhong Cao  Wen Lu  Huifeng Liu  Gauhu Sun  Chonghao Wang  Fei Liu 《国际泥沙研究》2018,33(4):433-440

Although thin on the order of several to tens of millimeters, sheet flows normally comprise a lower pick-up sub-layer and an upper contact-load sub-layer, separated at the bed level (z = 0). The time-averaged concentration profile in the pick-up sub-layer shows a ‘convex upward’ curvature, but ‘concave upward’ shape characterizes the time-averaged concentration profile in the contact-load sub-layer. The time-dependent concentration in the contact-load sub-layer is approximately in-phase with the free stream flow velocity, whereas it is nearly in anti-phase with the free stream flow velocity in the pick-up sub-layer. Two distinct analytical expressions of the time-averaged concentration profiles for the respective sub-layers are proposed. The expressions are validated with detailed observation datasets collected in the Groβer Wellenkanal (GWK) prototype wave flume in Hannover, Germany. The agreement between the predicted and the measured values is excellent. Interparticle collisions in the pick-up sub-layer and convective lifting processes associated with vortex shedding in the contact-load sub-layer are considered responsible for the opposite curvatures and in-phase/anti-phase concentration variations. Both transitional boundary and reference concentration are also elaborated.  相似文献   

煤层气井产出剖面测试技术及应用     

张雷  樊洪波  侯伟  张伟  郝帅  孙晓光 《吉林大学学报(地球科学版)》2020,50(2):617-626

现有常规油气井产出剖面测试方法在煤层气井中适应性较差，测试范围和测量工艺等存在局限性，施工成功率低。因此，本文对煤层气井产出剖面测试技术进行了整体的系统化设计和研发。通过紧凑的结构设计、高度集成，研发了一套可同时进行温度、压力、磁性定位、热式流量、探针持气率、微波持气、涡轮流量和超声流量等多参数测量的煤层气井测井仪，并研制了一套一次下井可进行多种测试技术测量的煤层气井产出剖面测试技术。同时提高了测试仪器的精度和抗干扰能力，开发了多任务多窗口的便携地面系统操作，并研制新型偏心测试井口应用于煤层气井，实现修井作业时不间断连续测试。该技术在鄂尔多斯盆地石楼北区块3口煤层气井进行了现场试验，取得精确、连续的测试数据。测试结果显示，石楼北区块8^#+9^#煤层为主力产气、产水层。  相似文献   

Modification and discussion of the Green-Ampt model for an evolving wetting profile   总被引：1，自引：0，他引：1  

Qiyong Zhang  Yuzhen Kong 《水文科学杂志》2020,65(12):2072-2082

ABSTRACT

The Green-Ampt (GA) model has been widely used to evaluate soil water infiltration. While a simple piston profile is commonly used, the wetting profile of a soil changes during infiltration and a quarter-ellipse has been found to better describe its evolution. This study aims to improve the GA model and discuss the model parameters when the quarter-ellipse profile is utilized. The soil column is divided into three zones: saturated, transient and dry. The variable γ is introduced to express the ratio of the saturated zone depth to the wetting front depth. A modified GA model is derived via mathematical methods, but an exact solution is difficult to obtain. Therefore, a simplified (SGA) model is developed via a segmented method. Compared with the measured results, the SGA model is more accurate than the traditional model. Finally, the model parameters are discussed and a value of γ = 0.5 is recommended.  相似文献   

不同形态海湾的水底平衡剖面研究     

苏文亮  邹志利  张庆民 《海洋学报》2020,42(5):128-138

研究海湾平衡剖面对理解海湾地貌演变具有重要意义。本文给出了收缩型、扩张型和矩形3种典型海湾平面形态对平衡剖面的影响。建立了海湾长度远小于潮汐波长的短尺度海湾的平衡剖面和对应的时均悬沙浓度的解析解。采用水深平均的水动力方程、泥沙输移方程和地形演变方程的耦合模型对以上3种类型海湾的平衡剖面进行了数值模拟，得到了这3种类型海湾的水面、流速、时均悬沙浓度和平衡剖面的计算结果，并利用水面数值结果确定了海湾水面解析解所含的一个待定常数。研究结果给出了3种不同海湾平面形态所对应的平衡剖面形态:矩形海湾对应斜坡型；收缩型海湾对应下凹型；扩张型海湾对应上凸型。所得海湾平衡剖面和时均悬沙浓度的解析解与数值解一致。  相似文献   

A finite element approach for predicting the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay     

《Applied Ocean Research》2019

This paper presents a finite element approach to calculate the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay, in which a potential for an installing spudcan to experience a sudden uncontrolled punch-through failure exists. A modified Mohr-Coulomb model characterized by incorporating a four-phase variation of the mobilized strength and dilation parameters with an equivalent accumulated plastic strain is developed and tested for the overlying dense silica sand. An extended Tresca model is used for the strain softening of the underlying clay. A series of large deformation finite-element (LDFE) analyses are carried out, varying the strength and dilation parameters as well as the spudcan geometries. A fairly good performance of the present approach is verified by validating against groups of centrifuge tests data, allowing the numerical study to be extended parametrically. The four-phase variation of the mobilized strength and dilation parameters involved in the progressive failure of the upper dense sand is parametrically studied and extended to cover the range of sand relative densities that are of practical interest. Additionally, comparisons with the typical existing LDFE analyses using both simple and sophisticated constitutive models are carried out. It shows that the present approach performs fairly well to calculate the full resistance profile of a spudcan deeply penetration in both thin and thick dense sand overlying clay, especially the peak and post-peak resistance, within around 5% of the corresponding centrifuge tests results.  相似文献   

Assessment of geomorphological bank evolution of the alluvial threshold rivers based on entropy concept parameters     

Azadeh Gholami  Majid Mohammadian  Amir Hossein Zaji  Bahram Gharabaghi 《水文科学杂志》2019,64(7):856-872

The complex stream bank profiles in alluvial channels and rivers that are formed after reaching equilibrium has been a popular topic of research for many geomorphologists and river engineers. The entropy theory has recently been successfully applied to this problem. However, the existing methods restrict the further application of the entropy parameter to determine the cross-section slope of the river banks. To solve this limitation, we introduce a novel approach in the extraction of the equation based on the calculation of the entropy parameter (λ) and the transverse slope of the bank profile at threshold channel conditions. The effects of different hydraulic and geometric parameters are evaluated on a variation of the entropy parameter. Sensitivity analysis on the parameters affecting the entropy parameter shows that the most effective parameter on the λ-slope multiplier is the maximum slope of the bank profile and the dimensionless lateral distance of the river banks.  相似文献   

Rill flow resistance law under equilibrium bed‐load transport conditions     

Costanza Di Stefano  Alessio Nicosia  Vincenzo Pampalone  Vincenzo Palmeri  Vito Ferro 《水文研究》2019,33(9):1317-1323

In this paper, a recently deduced flow resistance equation for open channel flow was tested under equilibrium bed‐load transport conditions in a rill. First, the flow resistance equation was deduced applying dimensional analysis and the incomplete self‐similarity condition for the flow velocity distribution. Then, the following steps were carried out for developing the analysis: (a) a relationship (Equation  13 ) between the Γ function of the velocity profile, the rill slope, and the Froude number was calibrated by the available measurements by Jiang et al.; (b) a relationship (Equation  17 ) between the Γ function, the rill slope, the Shields number, and the Froude number was calibrated by the same measurements; and (c) the Darcy–Weisbach friction factor values measured by Jiang et al. were compared with those calculated by the rill flow resistance equation with Γ estimated by Equations  13 and 17 . This last comparison demonstrated that the rill flow resistance equation, in which slope and Shields number, representative of sediment transport effects, are introduced, is characterized by the lowest values of the estimate errors.  相似文献   

AIRS卫星温度和臭氧廓线在南极的验证分析          下载免费PDF全文

张雷  丁明虎  卞林根  李建 《地球物理学报》2020,63(4):1318-1331

利用2008年中山站、Amundesen-Scott(SouthPole)站和Neumayer站为期一年的温度和臭氧探空数据,对AIRS第六版温度和臭氧垂直廓线产品在南极的精度进行了验证.结果表明,AIRS温度与探空温度总体上具有显著的一致性,其中对流层偏差最小(RMSe2℃),近地面温度由于受到下垫面影响偏差略大(RMSe～2℃),平流层偏差较大(2℃RMSe3℃),AIRS温度平均低于探空观测且受季节变化影响显著,秋冬季偏差整体上高于春夏季.AIRS臭氧反演精度在平流层(RMSe～25%)要优于对流层(RMSe～30%),RMSe最大值出现在UT-LS区域(可达40%)且在"臭氧洞"期间明显增大.AIRS产品精度在南极沿岸和内陆存在差异,由于南极地区探空资料较少且主要位于沿海,故在南极内陆地区进行探空观测对于提高卫星资料精度,改善该区域天气预报能力具有重大意义.  相似文献   

浅地层剖面系统在福建沿海海底沉船调查中的应用     

李海东  胡毅  许江  林兆彬  刘伯然  王恒波  郑江龙 《海洋技术学报》2019,38(1)

海底沉船是水下文化遗产的一种重要类型和存在形式,利用综合地球物理手段对福建平潭、莆田及福州海域的海底沉船进行了探测研究,并重点探讨了不同浅地层剖面系统及不同探测频率在不同埋藏状态的水下文物调查中的应用。结果表明:浅地层剖面探测能够有效识别处于不同埋藏状态的沉船,尤其对探测埋藏海底面以下的沉船具有其他探测手段无法比拟的优势,但是探测频率的调节对目标物探测结果存在较大差异,对于埋藏式的海底沉船低频信号探测效果较理想。  相似文献